BSMWT - 138 6713 KODAK MONOCOMPONENT 95 TONER

  • MSDS: BSMWT
  • Manufacturer: CANON INC
  • Product Name: 138 6713 KODAK MONOCOMPONENT 95 TONER
  • National Stock Number: 6850-00F031222
Product Identification

Product ID:138 6713 KODAK MONOCOMPONENT 95 TONER
MSDS Date:05/30/1992
FSC:6850
NIIN:00F031222
MSDS Number: BSMWT

Responsible Party
CANON INC
30-2 SHIMOMARUKO 3-CHOME
OHTO-KU, TOKYO
US

Emergency Phone: 716-722-5151

Info Phone: 716-722-5151

Cage: EO274

Contractor
EASTMAN KODAK CO GOVERNMENT MARKETS CONTRACTS
ROCHESTER, NY 14650-1115 US

Telephone: 716-722-5151/(800) 242-2424

Cage: 19139

Ingredients

STYRENE ACRYLATE COPOLYMER *93-3*

CAS: 23153-46-2

Fraction By Weight: 45-55%


IRON OXIDE, MAGNETITE

CAS: 1317-61-9

Fraction By Weight: 40-50%


SALICYLIC ACID CHROMIUM CHELATE *93-3*

CAS: 72869-85-3

Fraction By Weight: 1-3%

OSHA PEL 0.5 MG/CUM (CR)

ACGIH TLV: 0.5 MG/CUM (CR)

Hazards

Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYES: TRANSIENT IRRITATION. INGESTION:
LOW INGESTION HAZARD. INHALATION/SKIN: LOW HAZARD.
Explanation of Carcinogenicity:NONE

First Aid

First Aid:INHALATION: IF SYMPTOMATIC, MOVE TO FRESH AIR. EYES: WASH OUT
IMMEDIATELY W/WATER. SKIN: WASH W/SOAP & WATER. INGESTION: DRINK
1-2 GLASSES OF WATER. OBTAIN MEDICAL ATTENTION IN ALL CASES.

Fire Fighting

Flash Point:COMBUSTIBLE
Extinguishing Media:WATER SPRAY, CO2, DRY CHEMICAL
Unusual Fire/Explosion Hazard:POWDERED MATERIAL MAY FORM EXPLOSIVE
DUST-AIR MIXTURES

Accidental Release

Spill Release Procedures:DON'T USE VACUUM CLEANER FOR POWDERED TONERS.
THE VERY FINE PARTICLES CAN CAUSE A FIRE/EXPLOSION. SWEEP MATERIAL
ONTO PAPER & PLACE IN A FIBER CARTON.

Handling

Handling and Storage Precautions:KEEP FROM CONTACT W/OXIDIZING
MATERIALS. MINIMIZE DUST GENERATION/ACCUMULATION. USE ADEQUATE
VENTILATION. KEEP CONTAINER CLOSED.

Exposure Controls

Ventilation:GOOD VENTILATION
Protective Gloves:IMPERVIOUS
Other Protective Equipment:WASHING FACILITIES
Work Hygienic Practices:GOOD INDUSTRIAL HYGIENE PRACTICE SHOULD BE
FOLLOWED WHICH INCLUDES PREVENTING EYE/SKIN/INHALATION CONTACT.
Supplemental Safety and Health

Chemical Properties

Melt/Freeze Pt:M.P/F.P Text:212-302F
Vapor Pres:NEGLIGIBLE
Spec Gravity:1.4-1.6
Evaporation Rate & Reference:NEGLIGIBLE
Solubility in Water:NEGLIGIBLE
Appearance and Odor:SOLID BLACK POWDER, W/SLIGHT ODOR
Percent Volatiles by Volume:NEGLI

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS

Disposal

Waste Disposal Methods:CAN BE INCINERATED WHEN IN COMPLIANCE W/FEDERAL,
STATE & LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.